Gas Station Fuel Dispenser
The Gas Station Fuel Dispenser is designed for commercial retail stations and fleet fueling depots. It combines microprocessor-based control, precision metering, and reliable pumping components to support accurate fuel dispensing, flexible system integration, and dependable operation under continuous service conditions.
Product Overview
The Gas Station Fuel Dispenser is designed for commercial retail stations and fleet fueling depots. It combines microprocessor-based control, precision metering, and reliable pumping components to support accurate fuel dispensing, flexible system integration, and dependable operation under continuous service conditions.
Technical Specifications
|
Technical Parameter |
Standard Specification / Options |
|
Flow Rate Options |
Standard Speed: 45–50 LPM; High Speed: 80–120 LPM; selected configurations up to 250 LPM |
|
Metering Accuracy |
±0.15% to ±0.25% for applicable configurations after proper calibration |
|
Repeatability |
≤0.15% |
|
Working Pressure |
0.05–0.32 MPa |
|
Power Supply |
AC 380V / 220V (±20%), 50Hz / 60Hz |
|
Operating Temperature |
-40°C to +55°C (-40°F to +131°F) |
|
Relative Humidity |
30%–90% |
|
Noise Level |
≤80 dB(A) |
Product Configuration
Flexible Structure & Site Adaptability: Available in single-side/single-hose, multi-product/multi-hose, and master-satellite configurations to accommodate different forecourt layouts and fueling requirements.
Customizable Fuel Grade & Nozzle Configuration: Supports configurations from 1-product/1-hose to multi-product arrangements for gasoline, diesel, and other compatible fuel grades.
Multi-Hose Configuration: Available with up to 4 or 6 nozzles per dispenser unit, depending on the selected configuration, allowing multiple fuel grades to be dispensed from a single unit.
Ergonomic Nozzle Design: Equipped with commercial automatic nozzles, optional hold-open latches, and suitable spouts to provide convenient and controlled fueling.
Fuel Compatibility
Conventional Gasoline & Petrol: Configurations can be supplied for commonly used unleaded, premium, and other compatible gasoline grades according to the selected hydraulic and sealing components.
Diesel & Gasoil: Suitable configurations are available for diesel, gasoil, and other compatible middle-distillate fuels.
Alternative Fuel Blends: Compatibility with ethanol and biodiesel blends can be configured for selected models. Fuel concentration limits depend on the pump, meter, seals, hoses, valves, and other wetted components. Specific fuel compatibility should be confirmed before ordering.
Safety
Explosion-Proof Electrical Enclosures: Motors, junction boxes, solenoids, and other electrical components can be configured with appropriately certified explosion-protected equipment, including Ex d IIB T4 configurations where applicable to the installation requirements.
Shear / Emergency Shut-Off Valves: Base-mounted shear valves can automatically interrupt the fuel supply in the event of dispenser impact or other specified emergency conditions.
Automatic Breakaway Couplings: Breakaway couplings are designed to separate when excessive force is applied to the dispensing hose while helping seal the fuel line and reduce potential fuel release.
Maintenance
Spacious Access Doors: Lockable hinged panels provide convenient access to hydraulic, metering, calibration, and electrical components for inspection and routine maintenance.
Modular Electronics: Replaceable control modules and power supply units can simplify troubleshooting, maintenance, and component replacement.
Spare Parts Support: Maintenance kits can be supplied with commonly required replacement parts, including meter seals, solenoid coils, display modules, hoses, and other components according to the selected dispenser configuration.
Installation
Site Preparation: Install the dispenser on a level, reinforced concrete island with the required fuel lines, power conduits, communication cables, and grounding provisions prepared according to the project design.
Hydraulic Connection: Connect fuel product lines, shear valves, and optional vapor-recovery systems according to the selected dispenser configuration and applicable local requirements.
Electrical Connection: Complete power, communication, grounding, and hazardous-area conduit connections using approved components and installation methods appropriate for the site classification.
Testing & Calibration: Flush the fuel lines as required, perform appropriate leak and pressure checks, and verify meter performance using suitable certified or traceable test equipment before commissioning.
Certificate
Delivery & Package
fAQ
Q: Can these fuel dispensers be integrated with third-party Point of Sale (POS) and forecourt automation systems?
A: Yes. Selected configurations support commonly used communication interfaces, including current-loop and RS-485 connections, for integration with compatible forecourt controllers, POS systems, and station management platforms. Compatibility depends on the communication protocol, software architecture, and interface requirements of the customer's existing system.
Q: What is the standard measurement accuracy of your fuel dispenser meters, and how is it maintained?
A: Applicable positive-displacement meter configurations can achieve approximately ±0.15% to ±0.25% accuracy after proper calibration. Actual performance depends on the meter type, fuel characteristics, flow rate, installation conditions, and applicable metrology requirements. Periodic verification and calibration should be performed by qualified personnel using appropriate test equipment.
Q: Are the electrical motors and components safe for use in explosive fuel-vapor environments?
A: Hazardous-area configurations are available with appropriately certified explosion-protected electrical and control components. Ex d IIB T4 configurations can be supplied where applicable. The required protection type and certification depend on the hazardous-area classification, selected components, fuel characteristics, and destination-market regulations.
Q: Do you offer high-speed dispensers specifically designed for commercial truck and heavy vehicle fueling?
A: Yes. High-speed diesel configurations are available for commercial trucks, buses, and heavy vehicles, with selected models supporting flow rates from approximately 80 LPM to 120 LPM. Higher-flow configurations of up to 250 LPM may also be available for specific applications. Final performance depends on the pump, meter, hose, nozzle, and overall hydraulic configuration
Q: What power supply options are available for different international electrical grids?
A: Depending on the model and destination market, the dispenser can be configured for common electrical requirements such as AC 380V/415V three-phase or AC 220V/110V single-phase power at 50Hz or 60Hz. The required voltage, phase, and frequency should be specified when requesting a quotation so that the appropriate electrical configuration can be selected.
Q: How does the dispenser handle a power failure during an active fueling transaction?
A: Selected electronic control configurations include power-loss data protection designed to preserve relevant transaction information during an unexpected power interruption. Depending on the controller configuration, transaction information such as dispensed volume and transaction status can be retained and recovered after power is restored
Q: What documentation and certificates are shipped with each fuel dispenser?
A: The documentation package depends on the selected configuration and destination-market requirements. Typical documentation may include the technical manual, electrical wiring diagrams, factory inspection or calibration records, and applicable metrological or conformity documents. CE, ATEX, UL, or other market-specific certification documentation can be provided where applicable to the selected configuration.
Hot Tags: gas station fuel dispenser, China gas station fuel dispenser manufacturers, suppliers, factory, Commercial Fuel Dispenser, Digital Fuel Dispenser, Fuel Oil Dispenser, Gas Station Fuel Dispenser, Mobile Diesel Dispenser, Self Service Fuel Dispenser
Send Inquiry
