Auto Tank Gauge
Auto Tank Gauge is an automatic tank monitoring system for retail fuel stations with underground storage tanks. It monitors 1–6 tanks through a centralized interface, providing liquid level, water level and product temperature data for multi-tank station management.
Product Overview
Auto Tank Gauge is an automatic tank monitoring system for retail fuel stations with underground storage tanks. It monitors 1–6 tanks through a centralized interface, providing liquid level, water level and product temperature data for multi-tank station management.
Technical Specifications
|
Parameter |
Specification |
|
Measuring Range |
500–6000 mm |
|
Output Mode |
RS-485 |
|
Maximum Communication Distance |
1200 m |
|
Power Supply |
24 VDC |
|
Product Power Consumption |
≤60 mA |
|
Operating Temperature |
-30°C to +60°C |
|
Measurement Accuracy |
±0.5 mm |
|
Repeat Accuracy |
±0.2 mm |
|
Oil Level Resolution |
0.01 mm |
|
Water Level Resolution |
0.01 mm |
|
Temperature Measurement Points |
5 |
|
Temperature Sensor Resolution |
0.0625°C |
|
Upper Blind Spot |
60 mm |
|
Lower Blind Spot |
50 mm |
|
Explosion-Proof Mark |
Ex ia IIA T5 Ga |
|
Associated Equipment |
Zener Type Safety Barrier |
|
Communication Address |
2 digits, e.g. 01–99 |
|
Protection Class |
IP67 |
|
Suitable Media |
Gasoline, paraffin, diesel, light oil, heavy oil, methanol, toluene, ethanol, acetic acid, ethyl ester and other liquids |
System Configuration
The Auto Tank Gauge system consists of a monitoring unit, tank level probe and associated safety barrier where required by the hazardous-area configuration. The final configuration depends on the number of tanks, tank depth, monitored liquid and installation conditions.
Monitoring Unit
Serves as the central interface for tank data, configuration settings, alarm functions and station management.
Tank Level Probe
Installed in the storage tank to provide liquid level, water level and temperature measurement data. Probe selection should correspond to tank depth and required measuring range.
Safety Barrier
A Zener type safety barrier is specified as associated equipment for the listed Ex ia IIA T5 Ga configuration.
Configuration Confirmation
Before ordering, confirm the tank quantity, tank dimensions or depth, monitored liquid, probe requirements and hazardous-area installation conditions to determine the required system configuration.
Multi-Tank Tank Monitoring
1–6 Tank Monitoring
One Auto Tank Gauge monitors 1–6 storage tanks through a centralized monitoring interface, allowing operators to view connected tank data from one system.
Liquid, Water and Temperature Measurement
The system monitors tank liquid level and water level and provides average product temperature data for connected storage tanks. The tank gauge supports a 500–6000 mm measuring range, with 0.01 mm resolution for both oil level and water level.
Centralized Tank Status
Tank measurement data is displayed through the ATG monitoring interface, providing a centralized view of connected storage tanks for routine station operation.
Tank Configuration & Station Management
Tank Settings
The ATG interface provides tank setting functions for configuring parameters according to the connected storage tanks.
Tank Table Generation
The tank table generation function establishes the relationship between measured tank level and tank data for tank-level management.
Station Operating Functions
The system integrates station management functions including automated invoicing and shift handovers, allowing relevant operating information to be handled through the ATG interface.
Alarm & Abnormal Condition Monitoring
Leak Detection Alarm
The system provides leak detection alarm functions for identifying tank-related leakage conditions and displaying corresponding alarm indications.
Liquid-Level Alerts
Level alerts can be configured according to the required tank monitoring conditions, allowing operators to receive warnings when specified level conditions are reached.
Abnormal Condition Warning
The ATG provides warning indications for abnormal tank conditions that require operator attention.
Main Interface
Probe Settings
Tank Settings
Tank Table Generation
Probe Settings
Certificate
FAQ
Q: Is the Auto Tank Gauge supplied as a complete system?
A: The system configuration can include the monitoring unit, tank level probe and associated safety barrier according to the application and hazardous-area requirements.
Q: Can the packaging be arranged according to the order requirements?
A: Yes. Packaging can be confirmed according to the equipment configuration, order quantity and shipping method. Export packing requirements should be specified before production.
Q: What is the production lead time for an order?
A: The stated production lead time is generally 15–20 days. The actual schedule may vary according to order quantity and production conditions.
Q: Can you provide documentation with the shipment?
A: The available product and shipping documentation should be confirmed according to the order and destination market requirements.
Q: Can the Auto Tank Gauge be supplied for OEM or distributor orders?
A: OEM and distributor requirements can be discussed according to order quantity, configuration and labeling or packaging requirements.
Q: How should installation requirements be confirmed before shipment?
A: Provide the tank layout, installation conditions and relevant site requirements before production so the equipment configuration and connection requirements can be checked in advance.
Hot Tags: auto tank gauge, China auto tank gauge manufacturers, suppliers, factory, Atg Tank Monitor, Auto Tank Gauge, Automated Tank Gauge, Automatic Tank Gauge System, Digital Oil Tank Gauge, tank level gauge
Send Inquiry
